433MHz RF Transceiver RF1100 CC1101 Wireless Module
Introduction:
Micro-power wireless data transmission module.
Using high-performance TI-Chipcon's CC1101 wireless commucications chip.
The maximum transmission data rates up to 500Kbps, rate can modify by software.
Coverage up to 300~500 meters in open areas.
with a wireless wake-up features, sensitivity to -110dBm, high reliability,
working in the 433MHz frequency band. Compliance ETSI（EN300-220-1 & EN301-439-3), Compliance the requirements of wireless control, no need to apply frequency usage license.
( Document & setup software will sent to your ebay email box when you purchase )
Specification:
Operating voltage: 4.5~5.5V
The maximum rate of 500kbps, support for 2-FSK, GFSK and MSK modulation
Setup softwafe can modify Rate, Power, Frequency
High sensitivity (1.2Kbps under-110dBm, 1% packet error rate)
Built-in hardware CRC error detection, and address control
Lower current consumption (RX in, 15.6mA, 2.4Kbps, 433MHz)
Programmable control of output power, up to +10 dBm
Wireless wake-up functionality to support low-power electromagnetic activation, wireless wake-up low-power sleep state of the equipment
Support the transmission channel before the auto-clean-up visits (CCA), the Carrier Sense System
Fast frequency changes brought about by a suitable synthesizer frequency hopping system
Module can be software-based address, software programming is very convenient
Standard 2.0mm DIP spacing interfaces for embedded applications
Separate 64-byte RX and TX data FIFO
Transmission Distance: open to the actual transmission distance 250-300 meters (depending on the specific situation of the environment and communication baud rate settings
Dimensions: 58 mm (L) x 18 mm (W) x 12 mm (H)
Packing Included
2 x Wireless Serial Port Module
2 x Antenna
Please follow the link below for more information and find the best deal on the 2 x Wireless RF Transceiver Module 433Mhz CC1101 RF1100.
No comments:
Post a Comment