300Mbps 2.4Ghz ARGtek Wireless-N AP Router Repeater Client Bridge 1500mW 2T3R WLAN 802.11 b/g/n PoE WDS WISP White Review

300Mbps 2.4Ghz ARGtek Wireless-N AP Router Repeater Client Bridge 1500mW 2T3R WLAN 802.11 b/g/n PoE WDS WISP White is a high quality product that everyone can invest on. Before you decide to buy 300Mbps 2.4Ghz ARGtek Wireless-N AP Router Repeater Client Bridge 1500mW 2T3R WLAN 802.11 b/g/n PoE WDS WISP White, please read our review of this product.

  • Operate on 2.4Ghz frequency band including 11n 2T3R MIMO technology for enhanced throughput up to 300Mbps.
  • Support AP/Bridge, AP+Router, Clinet/Bridge, WISP(Client+Router), WISP+Universal Repeater, WDS, WDS+AP.
  • 1500mW high power output with 3 high sensitive detachable 5dBi dipole antennas for extended coverage.Provide one 10/100Mbps Ethernet WAN port and four Ethernet LAN ports. More stable, stronger signal, better performance and wall penetration capability, free of dead spot.
  • Compatible with IEEE 802.11b, IEEE 802.11g, IEEE 802.11n. Support PoE (Power Over Ethernet) function.Support multiple ESSIDs with individual security settings. Compliant with IEEE 802.3 and IEEE 802.3u 10/100 Mbps.
  • Configuration and management operated via Web browser with password-protected access. Support 64/128-bit WEP, WPA (TKIP with IEEE 802.1x), WPA2 (AES with IEEE 802.1x).Support NAT, SPI (Stateful Packet Inspection) for advanced firewall features. Support WMM function to meet the multimedia data bandwidth requirement.

Specifications:

Standards IEEE 802.1d (Spanning Tree Protocol)

IEEE 802.11b (11Mbps Wireless LAN)

IEEE 802.11g (54Mbps Wireless LAN)

IEEE 802.11n Draft 2.0 (300Mbps Wireless LAN)

IEEE 802.1x (Network Access Control)

IEEE 802.3 (10Base-T Ethernet)

IEEE 802.3u (100Base-TX Fast Ethernet)

Modulation technologies 802.11b: Direct Sequence Spread Spectrum (DSSS): DBPSK, DQPSK, CCK
802.11g: Orthogonal Frequency Division Multiplexing (OFDM): BPSK, QPSK, 16QAM, 64QAM

802.11n: Orthogonal Frequency Division Multiplexing (OFDM): BPSK, QPSK, 16QAM, 64QAM

Frequency range 2.400 ~ 2.483GHz

Data rates IEEE 802.11b (11 Mbps, 5.5 Mbps, 2 Mbps, 1 Mbps)

Output power 802.11n: 23 dBm +/- 1.5 dBm @300 Mbps

802.11g: 23 dBm +/- 1.5 dBm @54 Mbps

802.11b: 28 dBm +/- 1.5 dBm @11 Mbps

Receiver sensitivity 11n (300 Mbps) MCS0-15: -73 dBm

11g (54 Mbps) OFDM: -73 dBm

11b (11 Mbps) CCK: -91 dBm

Operation modes:Gateway mode

WPA TKIP

WPA2 AES

WPA2 mixed

Client access control through media access control (MAC) filter

General specifications Ethernet port: 5 RJ45 10/100 Mbps data port; 1 WAN and 4 LAN interface1
Flash: 4MB; Memory: 32MB SDRAM

LAN Link/Act

Operating humidity: 10 - 95% RH, non-condensing

Power adapter Input: 100-240V, 50/60Hz, 0.5A; Output: 12V, 1A

Ethernet cable length Approx. 1m / 3.28ft

Color :White

Router size (L * W * H) Approx. 15.5 * 11.5 * 4.8cm / 6.1 * 4.53 * 1.89in

Router weight Approx. 268g / 9.45oz

Package weight Approx. 604g / 1.33Lb



Package included:

1 * Wireless-N Router

3 * Antennas

1 * Ethernet Network Cable

1 * PoE DC Injector

1 * Power Adapter

1 * User's Manual



Please follow the link below for more information and find the best deal on the 300Mbps 2.4Ghz ARGtek Wireless-N AP Router Repeater Client Bridge 1500mW 2T3R WLAN 802.11 b/g/n PoE WDS WISP White.

300Mbps 2.4Ghz ARGtek Wireless-N AP Router Repeater Client Bridge 1500mW 2T3R WLAN 802.11 b/g/n PoE WDS WISP White

No comments:

Post a Comment